Analysis of dual band-reject filter unit cell based on Miller loading effect using strongly coupled parallel lines

Design of dual band-reject filter

Authors

  • salman talluri JUIT

DOI:

https://doi.org/10.32452/IJAMT.2022.283287

Keywords:

bandpass filter, bandreject filter, parallel coupled lines, scattering parameter, Tranmsmission line theory

Abstract

This paper presents the analysis of a novel unit cell of a dual-band reject filter. This unit cell is proposed by using the Miller loading effect on the band-pass filter. The bandpass filter used in this model is designed from parallel coupled lines. Miller loading effect is used in electronics to change the equivalent impedance at input and output ports by connecting an impedance between the input and output ports. This change in the equivalent impedance at input and output alters the resonant frequencies of the band-pass filter and makes it a dual band-reject filter depending on the nature of impedance that has been connected between the ports. Theoretical and numerical simulations is carried out on circuit models with normalized impedances and normalized resonant frequencies. To validate theoretical and numerical simulations, a microstrip bandpass filter based on parallel coupled lines has been converted into a dual band-reject filter. Full-wave electromagnetic simulations are performed and these simulation results are in good agreement with the theoretical and numerical simulations.

Metrics

Metrics Loading ...

References

References

D. Psychogiou, R. Gomez-Garcia, and D. Peroulis, “Rf wide-band bandpass filter with dynamic in-band multi-interference suppression capability,” IEEE Transactions on Circuits and Systems II: Express Briefs, vol. 65, no. 7, pp. 898-902, 2018.

H. Wang, K. Tam, W. Choi, W. Zhuang, S. Ho, W. Kang, and W. Wu, “Analysis of coupled cross-shaped resonator and its application to differential bandpass filters design,” IEEE Transactions on Microwave Theory and Techniques, vol. 62, no. 12, pp. 2942-2953, 2014.

S. Kumar, R. D. Gupta, and M. S. Parihar, “Multiple band notched filter using c-shaped and e-shaped resonator for uwb applications,” IEEE Microwave and Wireless Components Letters, vol. 26, no. 5, pp. 340-342, 2016.

L. Zhou, Y. Ma, J. Shi, J. Chen, and W. Che, “Differential dual-band bandpass filter with tunable lower band using embedded dgs unit for common-mode suppression,” IEEE Transactions on Microwave Theory and Techniques, vol. 64, no. 12, pp. 4183-4191, 2016.

F. Bagci, A. Fernýndez-Prieto, A. Lujambio, J. Martel, J. Bernal, and F. Medina, “Compact balanced dual-band bandpass filter based on modified coupled-embedded resonators,” IEEE Microwave and Wireless Components Letters, vol. 27, no. 1, pp. 31-33, 2017.

Y. Huang, J. Bao, G. Tang, Q. Zhang, T. Omori, and K. Hashimoto, “Design consideration of saw/baw band reject filters embedded in impedance converter,” IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, vol. 64, no. 9, pp. 1368-1374, 2017.

J. Sorocki, I. Piekarz, S. Gruszczynski, and K. Wincza, “Low-loss directional filters based on differential band-reject filters with improved isolation using phase inverter,” IEEE Microwave and Wireless Components Letters, vol. 28, no. 4, pp. 314-316, 2018.

D. M. Pozar, Microwave engineering. John wiley & sons, 2011.

A. S. Sedra and K. C. Smith, Microelectronic circuits. New York: Oxford University Press, 1998, vol. 1.

C. Caloz and T. Itoh, Electromagnetic metamaterials: transmission line theory and microwave applications. John Wiley & Sons, 2005.

MATLAB, version 7.10.0 (R2010a). Natick, Massachusetts: The MathWorks Inc., 2010.

Published

2022-06-03

How to Cite

talluri, salman. (2022). Analysis of dual band-reject filter unit cell based on Miller loading effect using strongly coupled parallel lines: Design of dual band-reject filter . International Journal of Advances in Microwave Technology, 7(2), 283-287. https://doi.org/10.32452/IJAMT.2022.283287